These kegs are converted pin lock Cornelius style kegs. The standard pin lock connections are replaced with the new CornyKeg ball lock conversion fittings. These posts are stainless steel and include our new stainless steel universal poppets. These posts accept all standard ball lock connectors.
Please note: There are two differences between our converted ball lock keg and a standard “Pepsi” style ball lock keg. Our converted kegs are 2” shorter and 1” larger in diameter and they have a static relief valve not the manual pull ring valve. Functionally they are exactly the same and accept all ball lock connections. All Converted CornyKeg ball lock kegs have been washed, rinsed, pressure checked, all orings have been replaced and the pin lock fittings are replaced with the new CornyKeg ball lock fittings. CornyKeg.com offers a 100% money back guarantee. If you are unhappy with the function of the corny keg you may return it for a full refund.
Keg Specifications:
Height: 22 - 23"
Height With Ball Lock Connectors: 23- 24"
Weight: 10 lbs
Diameter: 9"
Capacity: 5 gallon
Tank: Stainless Steel
Connection: Ball lock quick disconnect
Base/Top: Molded Rubber
Lid: Static Relief Valve or flat type /No Pull Ring
Shipping weight is approximately 45 lbs. The corny kegs are de-pressurized for shipment.
So far 3 of my 6 2.5 gallon kegs that I ordered, do not seal at all. I can hook up the co2 and it bleeds off and doesn’t even build pressure it’s like the opening isn’t big enough for the lid to seal.
I received my 4 kegs very quickly with a bit of a hiccup where one of the kegs had a bend in it that made it unable to seal or service the intake tube. After communication with customer service, they quickly sent a replacement.
Solid keg. Worth the money. Something funny is that the keg still had Pepsi in it when it was delivered, but it wasn't a problem at all. Definitely just make sure to sanitize it before you use this keg. Also the keg came pressurized at about 30psi
Very quick shipment. Soda wasn’t completely cleaned out, but I do have water and a hose at my house, so it wasn’t a big deal to me. Otherwise, works as advertised. They are now repressurizing tennis balls.
Running 40psi inlet pressure with about 30 psi gas pressure and it's doing it's job. Only using ground temperature water and no refrigeration currently.